Nowadays, the use of antiseptic wood in home decoration has become more and more frequent. For example, for wooden floors, the indicator of their hardware is that they must be waterproof, moisture-proof and anti-corrosion, so that the wooden floor will be durable in the process of use. So now there is also a kind of antiseptic wood on the market, and the floor made of this wood can do a good job of anti-corrosion. But I believe that many friends do not have a special understanding of the installation process of anti-corrosion wood, so in the following content, Residential Online will give you a specific explanation.

1、防腐木地板施工前準備去材料損耗 首先一定要將施工的現場清理干凈，施工前需要確認好位置與鋪設方向，材料如果太濕需涼干再安裝，使用含水量很大的木材施工安裝后會出現較大的變形和開裂。安裝一般木材損耗8%到12%左右，異形另算。

1. Before the construction of anti-corrosion wood floor, the material loss must be removed. The construction site must be cleaned up first. Before the construction, the location and laying direction must be confirmed. If the material is too wet, it needs to be cool and dry before installation. After the construction and installation of wood with large water content, large deformation and cracking will occur. Generally, the wood loss during installation is about 8% to 12%, and the abnormal shape is calculated separately.

2、地板龍骨的鋪設 防腐木地板鋪設前地面的找平一定要用防腐龍骨或鍍鋅方鋼龍骨一般間距300-400毫米，用水平儀檢查是否龍骨平整。鏈接成框架或者是井字架的結構，如果是有防水層地面鋪設龍骨可用（地板龍骨支撐器)或者用砂漿火磚墊底再鋪設龍骨。

2. Laying of floor keel Before laying of anti-corrosion wood floor, the ground must be leveled with anti-corrosion keel or galvanized square steel keel with a general spacing of 300-400 mm. Use a level gauge to check whether the keel is flat. For the structure linked into a frame or well shaped frame, if there is a waterproof layer, the keel can be laid on the ground (floor keel support device) or the keel can be laid with mortar bricks.

3、防腐木安裝 在進行制作和安裝防腐木時，防腐木地板之間需要留有3至5毫米的縫隙可以避免雨天積水以及防腐木的膨脹，地板連接應使用鍍鋅連接件或不銹鋼連接件及五金制品，以抗腐蝕。

3. During the production and installation of anti-corrosion wood, a gap of 3 to 5 mm should be left between the anti-corrosion wood floors to avoid water accumulation in rainy days and the expansion of anti-corrosion wood. Galvanized connectors or stainless steel connectors and hardware products should be used for floor connection to prevent corrosion.

4、防腐木安裝如何做油漆 防腐木地板做漆前需要保持地板材料表面干燥，然后用120至240磨砂紙進行打磨，材料刷漆建議材料背面都做油漆那樣才能更好的保護木材使用壽命，一般防腐木材料需做2-3遍油漆。

4. How to paint the anticorrosive wood installation Before painting the anticorrosive wood floor, it is necessary to keep the surface of the floor material dry, and then polish it with 120 to 240 sandpaper. It is recommended that the back of the material be painted so as to better protect the service life of the wood. Generally, anticorrosive wood materials need to be painted for 2-3 times.

以上就是為大家介紹的有關濟南防腐木的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以專業的態度,為您提供服務http://www.ygscw.cn

The above is a detailed introduction of Jinan antiseptic wood, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://www.ygscw.cn